Switching From iPhone to Android? How to Move Your InCard Finder to Google Find Hub
By InCard Team · September 22, 2026 · 10 min read
Switching From iPhone to Android? How to Move Your InCard Finder to Google's Find Hub
Switching from an iPhone to an Android phone no longer means giving up native item tracking. Google's Find Hub gives Android users a built-in finding network for compatible Bluetooth trackers, while Apple users have the Find My network.
But a dual-network tracker does not connect to both networks at the same time.
If your InCard Finder is currently paired with Apple Find My and you want to use it with Google's Find Hub—or you are moving in the opposite direction—you must remove it from the old account, perform a factory reset, and pair it with the new phone.
This guide explains the complete process, why each step matters, and what to check if the new phone does not detect your tracker.
The Short Answer
To switch an InCard Finder from iPhone to Android:
- Keep the InCard Finder near your iPhone.
- Remove it from the Apple Find My app.
- Perform the physical factory-reset sequence on the card.
- Place it near your unlocked Android phone.
- Add it to Google's Find Hub.
To switch from Android to iPhone, follow the same basic process in reverse: remove the tracker from Google's Find Hub, factory reset it, and then add it as an item in Apple Find My.
Why a Factory Reset Is Required
InCard Finder supports both Apple Find My and Google's Find Hub, but it uses only one network at a time.
The network is selected during setup. Once paired, the tracker stays configured for that network until it is removed and reset. This is intentional: the two finding networks have separate account systems, pairing processes, and accessory requirements.
A factory reset clears the current pairing state so the InCard Finder can enter setup mode for the other network.
Simply turning Bluetooth off, deleting the app, or restarting your phone does not switch the tracker between networks.
Before You Start
Prepare both the tracker and the phone before removing anything.
Make sure the InCard Finder is nearby
Keep the card within Bluetooth range of the phone that currently owns it. Removing a tracker while it is nearby gives the app the best chance to send the removal command to the accessory.
Confirm the current account
Open Apple Find My or Google's Find Hub and verify that the InCard Finder appears in the account you are about to leave.
If the tracker belongs to another family member or was paired with a different account, that account may need to remove it first.
Update the new phone
Install current operating-system updates and make sure Bluetooth, location services, and internet access are enabled.
On Android, confirm that Google's Find Hub is available and that you are signed in to the Google account you want to use. On iPhone, sign in to the intended Apple Account and open Find My.
Step 1: Remove InCard Finder From Apple Find My
If you are moving from iPhone to Android:
- Open the Find My app on the iPhone.
- Select the Items tab.
- Choose your InCard Finder.
- Scroll to the removal option.
- Select Remove Item and confirm.
Keep the card near the iPhone during this process.
Removing it from Find My is important because a factory reset alone does not necessarily remove the accessory from the previous Apple Account. If the old account still owns the item, pairing it to a different account can fail.
Step 2: Factory Reset the InCard Finder
After removing the tracker from the old app, perform the physical reset:
- Locate the button on the bottom-right area of the Finder beneath the InCard logo.
- Firmly double-press the button. You should hear a beep.
- Press and hold the button.
- After approximately five seconds, the Finder will begin beeping once per second.
- Continue holding the button.
- Release it as soon as you hear a double beep.
- A successful reset is confirmed when the Finder beeps four times.
If you do not hear the four-beep confirmation, repeat the sequence carefully. The timing of the final release matters.
Step 3: Pair With Google's Find Hub
Once the reset succeeds:
- Unlock your Android phone and enable Bluetooth.
- Make sure the phone has internet access.
- Place the InCard Finder next to the phone.
- Press the Finder’s button once to activate setup mode.
- Wait for the setup notification to appear.
- Follow the on-screen instructions to add the Finder to Google's Find Hub.
- Give the item a recognizable name, such as “Wallet” or “Work Bag.”
After setup, open Google's Find Hub and confirm that the item appears. Test the nearby connection by using the option to play a sound.
Moving From Android to iPhone
The reverse process follows the same three-part pattern.
Remove the tracker from Google's Find Hub
Open Google's Find Hub, select the InCard Finder, and use the option to remove the device from your account. Keep the tracker nearby while completing the removal.
Perform the factory reset
Use the same physical reset sequence:
- Firmly double-press and listen for a beep.
- Press and hold.
- Continue holding when the once-per-second beeps begin.
- Release on the double beep.
- Listen for four beeps confirming success.
Add the tracker to Apple Find My
- Place the reset InCard Finder next to the iPhone.
- Press the button once to activate it.
- Open Find My.
- Select the Items tab.
- Tap Add Item or the plus button.
- Choose Add Other Item or Other Supported Item.
- Follow the prompts to finish pairing.
When setup is complete, select the Finder in the Items tab and test its sound.
What If the New Phone Cannot Find the Tracker?
Most pairing problems come from an incomplete account removal, an unsuccessful factory reset, or phone settings.
The tracker is still linked to the previous account
Return to the old phone or account and verify that the InCard Finder has been removed. If you no longer have the old phone, sign in with the same account on another supported device and check the finding app.
This is especially important when moving away from Apple Find My. The previous Apple Account must release the item before another user can claim it.
The reset did not finish
Repeat the reset process and listen for the final four beeps. Releasing the button too early or too late can prevent the reset from completing.
Bluetooth or location settings are disabled
Enable Bluetooth and location services, connect the phone to the internet, and keep the phone unlocked during setup.
The phone is not updated
Install current system and Google Play system updates on Android, or the latest compatible iOS version on iPhone.
The tracker is too far away
Place the card directly next to the phone during pairing. Do not attempt initial setup from another room or while the tracker is inside a signal-blocking case.
Another nearby phone is trying to claim it
Move away from other phones that are actively searching for accessories and restart the setup process with only the intended phone nearby.
What Happens to the Old Location History?
When you remove the InCard Finder from one finding network and pair it with another, the new network starts a new relationship with the tracker.
Do not expect Apple Find My history to transfer into Google's Find Hub, or Google's Find Hub information to appear in Apple Find My. The networks and accounts are separate.
Before switching, save any information you need from the old app.
Can You Switch Back Later?
Yes. InCard Finder is designed to work with either Apple Find My or Google's Find Hub. You can switch again if you change phones later.
Each switch requires:
- Removing the item from the current network account.
- Performing a factory reset.
- Pairing it through the other network’s setup flow.
There is no subscription fee for switching, and InCard Finder does not require a separate InCard account.
Can One InCard Finder Work With iPhone and Android at the Same Time?
No. InCard Finder is dual-network compatible, but not simultaneous dual-network.
You choose one network during setup:
- Apple Find My for Apple devices, or
- Google's Find Hub for Android devices.
The card stays on that network until you remove and reset it. If your household uses both platforms, each tracker should be assigned to the network used by the person responsible for that item.
What About Family Sharing?
Sharing options are controlled by the selected finding network and can change as Apple and Google update their services.
Set up the InCard Finder with the primary owner first. After pairing, review the sharing controls available in Apple Find My or Google's Find Hub. Everyone helping locate the item should use accounts and devices supported by that network.
Sharing access does not make the tracker operate on both Apple and Google networks.
Tips for a Smooth Phone Switch
Switch before erasing or trading in the old phone
Remove the tracker while you still have access to the original device and account. This avoids a more difficult account-recovery process later.
Keep your account credentials available
You may need to verify the old Apple or Google account before it will release the accessory.
Test the sound after pairing
Do not wait until the wallet is missing. Confirm immediately that the new phone sees the tracker and can play its audible alert.
Rename the item clearly
Use a name that describes the actual belonging. “Jason’s Wallet” is more useful than a generic name such as “Tracker.”
Review unwanted-tracking alerts with family members
A tracker separated from its owner may trigger a safety alert on another person’s phone. Tell family members or travel companions when a tracked item will be traveling with them.
Frequently Asked Questions
Does deleting Find My or Find Hub reset the tracker?
No. Deleting or disabling an app does not perform the InCard Finder’s physical factory reset and may not remove it from the account.
Can I reset the card without removing it from the old account?
You can perform the physical sequence, but the previous account may still retain ownership information. Always remove the item from the old finding app as part of a proper transfer.
Will switching networks reduce the battery life?
The reset itself is not expected to cause a meaningful reduction. Rated battery life differs by network use: InCard Finder is rated for up to five years on Google's Find Hub and up to three years on Apple Find My.
Do I need an InCard app?
No. InCard Finder uses Apple Find My or Google's Find Hub directly. There is no separate InCard tracking app or required InCard account.
Do I need to buy a different InCard Finder after changing phones?
No. The same InCard Finder can be reset and paired with the other supported network.
The Bottom Line
Moving an InCard Finder between iPhone and Android is straightforward when you follow the steps in the correct order:
- Remove it from the current finding-network account.
- Complete the physical factory reset and listen for four confirmation beeps.
- Pair it with the new phone through Apple Find My or Google's Find Hub.
The most common mistake is resetting the card without first releasing it from the old account. Complete both steps, keep the tracker close to the phones during the transfer, and test the sound immediately after pairing.
One InCard Finder can support either mobile platform—just one network at a time.